How To Make Raised Garden Beds

Raised Garden Bed

There are many options for building raised garden beds, from sizes to materials, and there are many things to consider.

Besides being a practical way to grow any variety of plants but raised garden beds can also be a nice aesthetic look around a home, in a yard, or garden with the right design and materials.

The materials, design, and placement of your garden beds should be well thought out because of the time, money, and effort that needs to be put in to create the space that you want.

Raised garden beds allow you to have the ability to have a garden bed without needing to make major improvements to the soil.

MATERIALS

The most common type of material used for the construction of a raised garden bed is lumber but not all kinds of lumber can offer the ability of rot and pest resistance.

Then there is the option of buying premade garden beds at garden centers and home improvement stores that are made from wood, and metal.

Raised beds that are made of plastic are an option but they will break down into microplastics and may be absorbed by the plants that you will be eating if the garden bed is for growing food.

When deciding on the materials being used, it is important to know that an 8 to 12-inch deep raised bed will be sufficient for flowering plants to take root.

For growing food, you will need a raised bed that is one foot to one and a half feet deep for their larger and deeper roots.

WOOD

Cedar and redwood are the best choices for wood-framed raised gardens because these materials will last for 10 years before needing to be replaced and repel pests.

Juniper is another wood that can last for 10 years, but this wood has natural oils that leach into the soil and will help to fertilize your raised bed.

Cypress will last for about 8 years and is resistant to pests and rot but it may be difficult to find if you don’t live in the southern U.S. where it is grown. If you decide to choose cypress then you will have to place a custom order.

Pine is the most economical lumber for a raised garden but it will last about 3 years and doesn’t provide any protection against rot or pests.

Pressure-treated lumber is another option but it is not recommended for raised garden beds that will be used for food. Pressure-treated lumber uses toxic chemicals that you don’t want to leach into the soil.

You can keep the wood from growing mold and mildew by spraying a baking soda and water mix on the wood to kill or prevent it from growing.

CORRUGATED METAL

Corrugated metal raised beds are a good economical choice for extra growing space or for creating a certain look with less worry about rot and pests.

If you decide to use sheets of corrugated metal, you will still need to build a frame to attach the corrugated sheets. The two options available are lumber and metal studs.

They cost about the same but the metal studs will never need to be replaced and can be purchased at any home improvement store.

You can also buy corrugated metal containers that are as long as 6 feet and as high as 32 inches, or round containers.

These containers can be purchased at any garden center, home improvement store, or online retailer and they range from $60 to as much as $380 depending on the size of the container.

BLOCK OR BRICK

Cinder blocks for a raised garden are another good economical choice with no need to worry about rotting and pests destroying it.

They are 8 inches tall and they can be dry-stacked without mortar if you like. Unlike the other material, you have an extra option.

With cinder blocks, placing the holes up is the only way to build a garden bed but it gives you the ability to fill those holes and plant in them.

You can use them as a protective border around your vegetables by using plants like marigolds to deter pests or add an attractive border around a botanical garden.

Raised garden beds in brick can give a natural but elegant look around a home or in a yard. With many different styles to choose from, this is one option that can gussie up any area.

Bricks will be more costly than cinder blocks but they also offer a different look that may be desired especially with the right plants.

STONE

Stone garden beds are by far the best-looking material that will enhance any area that is used.

Stone is the second most expensive material to use for a raised bed, but if it fits your budget then it is well worth it for the aesthetics and longevity, also it can help with the overall look of the entire design.

You can dry-stack the stone or use mortar to hold the stones together but remember that the mortar contains lime which will leach into the soil, making it more alkaline.

Depending on the soil this may be helpful or you may need to increase the pH level. You can purchase a pH test kit or a pH meter to keep track of the pH levels.

Using stone has an added benefit because it is a natural insulator keeping the soil temperature cooler than any other type of material and it also helps to retain moisture in the soil.

Using stone will eliminate the issues of rot and pests but it will still need to be cleaned. A low-pressure washer or a brush and water will be enough to clean any dirt off the stones.

If you have algae growing on the stone, spray the stone with a vinegar and water solution to kill it, then you can pressure wash or brush the algae off the stone.

CONCRETE

Concrete is going to be the most expensive material to build a raised garden bed but it will last the longest.

A concrete garden bed is also going to be the most labor-intensive because a form has to be made, rebar needs to be installed for added strength, and after the pouring of the concrete, it will take 24 hours to set.

Precast concrete panels are another option that will reduce the time it takes to construct the garden bed.

After they have been assembled, a piece of rebar is inserted into the four corners of the garden bed to hold everything in place.

Sizes

When choosing the sizes of raised garden beds there are two things that you should consider, your budget and the desired look that you are wanting to create.

The height of the beds varies from six to twelve inches, and some people go as high as 36 inches. The width of the beds should be enough to reach the center without stepping in the middle of the garden.

Raised garden beds can be any size, but remember that the soil’s weight adds pressure to the sides of the frame. To avoid this, use cross-supports to avoid settling and buckling. Once these supports are in place, you can plant your plants.

Compaction of soil

When roots cannot move freely through the soil, they are forced to look for an alternative path which is typically a horizontal one.

This results in a shallow root system, limiting plant nutrition which hinders growth, and a shallow root system can cause the plant to fall over.

Additionally, lack of aeration can destroy beneficial mycorrhizae, which is a fungus that helps plants to flourish by improving the intake of nutrients and water in the soil.

There are several ways to improve the compaction of soil for raised garden beds, including the addition of compost, utilizing a cover crop, or using gardening tools like a pitchfork.

Irrigation

There are a few options for watering your raised beds which include drip irrigation, a sprinkler system, or water by hand.

Unlike traditional irrigation methods, drip irrigation will help prevent soil waterborne disease. Furthermore, drip irrigation allows you to conserve water by watering your plants at ground level.

A sprinkler system is by far the easiest method of watering, especially when using it with a timer. Depending on your budget, you can install a permanent system using copper or PVC piping.

The other option is using hoses and sprinklers. If this option is used then make sure to store the hoses and sprinklers to avoid sun damage to them.

Burying irrigation pipes for a sprinkler system is a must but you can also bury most of a drip irrigation system.

Watch for signs of under-watering, like brown dry leaf edges or slow growth. If you notice the plants wilting in the afternoon, they may be suffering from heat stress.